Fluids Problem #5 · Bernoulli’s Equation

Where the pipe
gets narrower.

Fluids 5 marks

Problem

Water flows along a horizontal pipe with an internal diameter of 9.5 cm at 1.3 m/s. Further along, the pipe narrows to an internal diameter of 4.5 cm. Treat the water as an ideal fluid with a density of 1000 kg/m³. Calculate how much lower the pressure is in the narrow part than in the wide part, in kPa.

  • Wide diameter\( d_1 = 9.5\ \mathrm{cm} \)
  • Speed in the wide part\( v_1 = 1.3\ \mathrm{m/s} \)
  • Narrow diameter\( d_2 = 4.5\ \mathrm{cm} \)
  • Water density\( \rho = 1000\ \mathrm{kg/m^3} \)
  • Answer inkPa
The pipe is level, so the height terms in Bernoulli’s equation cancel.
Hint: the volume flow rate \( Av \) is the same in both parts, so find the speed in the narrow part first. Then use Bernoulli’s equation at one height.
Create a free account to solve
Submit your answer and unlock the full mark scheme.
  • Full mark schemes, not just answers
  • Every problem you solve is saved to your account
  • Track your mastery, topic by topic
Create free account
Already have an account?
A Physi+ practice version
The same problem as the free version, with new numbers, so you can practise it until it sticks. The practice versions come with Physi+.
Solve the free problem
Or get every practice version with Physi+ · 14 days free
You solved this problem
It’s saved to your account. The mark scheme is below, and you can check an answer again anytime.

Submit your answer

Solve it on paper first — then check yourself.

Your answer
kPa
Give at least 2 significant figures: a correctly rounded answer, or one within ±1%, counts.
Up next · Thermodynamics Heating a Gas at Constant Pressure Keep the streak going with a fresh problem in Thermodynamics.
Practice again · New numbers Water Through a Narrowing Pipe (Practice) Same problem, different numbers — 9 variants to try.
Mark schemeClick to open
Loading solvers…
Recently solved
Loading…
to save your progress
Physics is better with others.
Report an issue
Spotted a mistake or something unclear? Email us and we'll take a look: